100V / 8Ω Input
The integrated transformer allows you to use the speaker at 100V line or low impedance 8Ω depending on the needs of your installation.
HF Driver Protection
The HF Driver Protection gives the speaker a higher protection on the High Frequency Driver against unexpected audio peaks during music reproduction.
Frameless Design
The frameless design allows you have an unobtrusive sound source, keeping the architectural requirements of your installation.
Detachable Logo
The logo is detachable, which means you can remove it if a clean design is needed on your installation.
Environment Equalizer
You can use the Environment Equalizer to automatically adjust the sound, for the area where the ceiling speaker is installed.
Magnetic Grille
The magnetic grille allows a very easy installation without screws. You just need to install your speaker on the wall or ceiling and place the magnetic grill that will fit automatically.

Product Type: 2-Way Premium Ceiling Speaker (8Ω/100V)
Frequency Response (-6dB): 70Hz – 20kHz
Nominal Coverage: 100° Conical
RMS Power: 40W (8Ω)
Program Power: 80W (8Ω)
Nominal Impedance: 8Ω (Transformer bypass)
Sensitivity (1W, 1m): 90dB
Maximum SPL (calculated): 109dB
Transformer Taps 100V: 2.5W | 5W | 10W
Transformer Taps 70V: 1.25W | 2.5W | 5W
Low Frequency Driver: 5.25″ Reinforced Polymer Cone Woofer
High Frequency Driver: 0.75″ Pivoting (±10°) Titanium Dome Tweeter
Input Connectors: Gold Plated Binding Posts (8Ω) / Quick Release Connector (100V)
Special Features: Adjustable Environment Equalizer (±3dB)
Grille: White Frameless Magnetic Grille (Paintable) | Detachable Logo
IP Rating: Indoor Use
Dimensions (ØxD): 204mm x 78mm (8″ x 3.1″)
Cutout Diameter: 179mm (7″)
Mounting Depth: 78mm (3.1″)
Wall / Ceiling Thickness: 3mm to 15mm (0.12″ to 0.59″)
Fixation: Plastic Clamps for Ceiling Fixation
Net Weight: 1.2kg (2.6lb)
Shipping Weight: 1.5kg (3.3lb)

You may also like…