JBL Control 88M

JBL Control 88M


Two-Way 8 inch (200mm) Coaxial Mushroom Landscape Speaker.

SKU: Control 88M Categories: , , , Tag:
  • Description
  • Additional information


Wiring Water ingress protected by two stages of gland nuts, one mounted on outside of enclosure (installed by installer via drilling 22 mm (0.875 in, 7/8 in) hole in any of multiple provided locations) and one between the bottom base and top speaker sections. Included gland nuts require round-jacketed wire with outside diameter between 4.0 mm and 9.0 mm (0.16” in and 0.35” in). For Installation instructions, see Installation Guide (#IS-C80MLS).
Colors Hunter Green, RAL6018

Additional information


FREQUENCY Response : (-10dB) 47 Hz – 16 kHz
Power Rating : 240 W Continuous Program (2 hrs)
120W (480W peak), Continuous Pink Noise (2 hrs)
100W (400W peak) Continuous Pink Noise (100 hrs)
Transformer Taps 70V: 60W, 30W, 15W & 7.5W
100V: 60W, 30W, 15W
FREQUENCY RESPONSE : (±3 dB) 60Hz – 15 kHz
Maximum Input Voltage : 28.0 V
SENSITIVITY : 87 dB, 1W @ 1m (ave. 80Hz – 16kHz)
Nominal Coverage Angle : 360° horizontal, 160° vertical (primary listening 10° to 50° up from ground).
Directivity (Q) : 2.1
Directivity Index (DI) : 3.2 dB
Rated Maximum SPL : 108 dB @ 1m
NOMINAL IMPEDANCE : 8Ω (at 8Ω setting)
Minimum Impedance 6.6Ω at 9.5kHz
Insertion Loss : <0.5 dB at any tap setting
Thru Setting : 8Ω nominal
CROSSOVER TYPE : 2nd Order LPF on LF and 2nd Order HPF on HF
Recommended Protective High-Pass : 45 Hz for 8Ω operation, 24 dB/oct,80 Hz for 60W tap, 24 dB/oct,50 Hz for 30W, 7.5W, and 7.5W taps, 24 dB/oct
Low Frequency Driver : 200 mm (8.00 in) diameter LF driver, Kapton™ former, 38mm (1.5 in) voice coil, polypropylene cone and polyurethane surround.
High Frequency : 25mm (1.0 in) diameter HF driver Polyetherimide (PEI) dome.
ENCLOSURE Material LDPE : Polyethylene plastic, 6 mm wall thickness, UL94V-0 rated.
GRILLE : Powder coated stainless steel.
Environmental : IP-55 rating per IEC529 (dust protected and protected against jets of water). Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-STd-202F for salt spray. Enclosure : UL94V0 rated.
Agency Ratings : UL1480, Transformer UL Recognized per UL1876, ROHS compliant.
Terminals Bare wire with dielectric-gel-filled wire nuts (internal to top speaker section)

Dimensions (H x W x D) : 524 x 355 x 355 mm (20.7 x 14 x 14 in.)
Net Weight : 7.8 kg (17 lb)
Shipping Weight : 10.5 kg (23 lb)
Included Accessories (2) : wire nuts, (2) gland nuts, (1) right-angle screwdriver
Installer-Supplied Required Tools : 22mm (0.875 in, 7/8 in) twist-type drill bit (or other type suitable for plastic) for installing gland nut into enclosure.

You've just added this product to the cart: