JBL Control 85M

JBL Control 85M

316.00

Two-Way 5.25 inch (135mm) Coaxial Mushroom Landscape Speaker.

SKU: Control 85M Categories: , , Tag:
Compare
  • Description
  • Additional information

Description

Terminals Bare wire with dielectric-gel-filled wire nuts (internal to top speaker section).
Wiring Water ingress protected by two stages of gland nuts, one mounted on outside of enclosure (installed by installer via drilling 22 mm (0.875 in, 7/8 in) hole in any of multiple provided locations) and one between the bottom base and top speaker sections. Included gland nuts require round-jacketed wire with outside diameter between 4.0 mm and 9.0 mm (0.16” in and 0.35” in). For installation instructions see Installation Guide (# IS C80MLS).

Additional information

Specification

FREQUENCY Response : (-10dB) 55 Hz – 18 kHz
Power Rating : 160 W Continuous Program (2 hrs)
80 W (320W peak), Continuous Pink Noise (2 hrs)
45 W (180W peak) Continuous Pink Noise (100 hrs)
Transformer Taps : 70V: 30W, 15W, 7.5W & 3.8W
100V: 30W, 15W, 7.5W
FREQUENCY RESPONSE : (±3 dB) 65Hz – 16 kHz
Maximum Input Voltage : 23.3 V
SENSITIVITY : 86 dB, 1W @ 1m (ave. 80Hz – 16kHz)
Nominal Coverage Angle : 360° horizontal, 160° vertical (primary listening 10° to 50° up from ground).
Directivity (Q) : 2.2
Directivity Index (DI) : 3.4 dB
Maximum SPL : 105 dB @ 1m
NOMINAL IMPEDANCE : 8Ω (at 8Ω setting)
Insertion Loss : <1.0 dB at any tap setting
Thru Setting : 8Ω nominal
CROSSOVER TYPE : 2nd Order LPF on LF and 2nd Order HPF on HF
Recommended Protective High-Pass : 65 Hz for 8Ω operation, 24 dB/oct 60 Hz for 30W tap, 24 dB/oct,50 Hz for 15W, 7,5W, and 3.7W taps, 24 dB/oct
Low Frequency Driver : 135 mm (5.25 in) diameter LF driver, Kapton™ former, 35.5mm (1.4 in) voice coil, polypropylene cone and polyurethane surround.
High Frequency : 19mm (0.75 in) diameter HF driver Polyetherimide (PEI) dome.
ENCLOSURE Material : LDPE Polyethylene plastic, 6 mm wall thickness, UL94V-0 rated.
GRILLE : Powder coated stainless steel.
Environmental : IP-55 rating per IEC529 (dust protected and protected against jets of water). Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-STd-202F for salt spray. Enclosure : UL94V0 rated.
Agency Ratings : UL1480, Transformer UL Recognized per UL1876, ROHS compliant.
Colors Hunter : Green, RAL6018
Dimensions (H x W x D) : 432 x 291 x 291mm (17 x 11.5 x 11.5 in.)
Net Weight : 5.5 kg (12 lb)
Shipping Weight : 7.3 kg (16 lb)
Included Accessories : (2) wire nuts, (2) gland nuts, (1) right-angle screwdriver
Installer-Supplied Required Tools : 22mm (0.875 in, 7/8 in) twist-type drill bit (or other type suitable for plastic) for installing gland nut into enclosure.

You've just added this product to the cart: