The DSP 260 Digital Sound System is a two-input, six-output digital signal processor with the flexibilty of configuration to handle a multitude of audio system needs and applications; installed sound, hose of worship, convention & meeting facilities, concert touring, club, portable sourd reinforcement and more. The configuration and operation of the device can be done via the front panel or the DSP 260 Editor software.

  • Mains Voltage: 100-240 VAC 50-60 Hz
  • Power Consumption: 25W
  • Analog Inputs: 2x XLR IN, electronically balanced, 2x XLR THRU OUT, electronically balanced
  • Digital Inputs: 1x XLR AES/EBU IN
  • Nominal Input Voltage: 1.23 V / +4 dBu
  • Maximum Input Voltage (Without -6dB Analog Pad Engaged): 8.7 V / +21 dBu
  • Input Impedance: 10k ohm
  • Common Mode Rejection: -80 dB @ 1 kHz (typical)
  • A/D Conversion: 24-Bit Sigma-Delta
  • Outputs: 6x XLR OUT, electronically balanced
  • Nominal Output Voltage: 1.23 V / +4 dBu
  • Maximum Output Voltage: 8.7 V / +21 dBu
  • Output Impedance: 50 ohm
  • D/A Conversion: 24-Bit Sigma-Delta
  • Frequency Response: 10 Hz-22 kHz (+/- 0.5 dB)
  • THD+N: < 0.01% (band limited 22Hz-22kHz)
  • 111 dB unweighted, band limited 22 Hz – 22 kHz
  • USB: USB Type B on front panel (PC Interface)
  • 9-pin DSUB: Software Confi gurable for GPI Preset Recall or Master/Slave Connection to second DSP 260 unit
  • Sample Rate: 48 kHz
  • Data Format: 24-Bit
  • Internal Processing: 32-Bit Floating Point
  • Dimensions (WxHxD): 19 x 14 x 1.75 inches (482.6 x 355.6 x 44.45 mm)
  • Weight (Net): 10.1 lb (4.6 kg)
  • Weight (Gross): 13.0 lb (5.9 kg)