Db Technologies VIO L210

Description

• 2 way active line array system
• network ready with an integrated rdnet port
• newly designed wooden enclosure coated with polyurea
• smooth configuration and set up
• exclusively designed waveguide
• aluminium phase plugs
• advanced dsp with fir filters
• lightweight neodymium magnets
• on-board double rotary eq control system

Tech specs / Technical Data

• Speaker Type: 2-way Active Line Array Module

Acoustical data

• Usable Bandwidth [- 6 dB]: 67-20,000 Hz
• Frequency Response [+/- 3dB]: 78-18,100 Hz
• Max SPL: 135 dB
• HF: 1×1.4″
• Voice Coil HF: 3″
• Type HF: Neodymium, Titanium Diaphragm
• LF: 2×10″
• Voice Coil LF: 2.5″
• Type LF: Neodymium Aluminium Phase Plug
• Horizontal Directivity: 100°
• Vertical Directivity: depends on array size and configuration

Amplifier

• Amp Technology: Digipro G3
• Amp Class: Class-D
• Power RMS: 900 W
• Peak Power: 1800 W
• Cooling: Convection
• Power Supply: 900 W SMPS with Auto-range PSU

Processor

• Controller: DSP 56 bit
• AD/DA Converter: 24 bit/48 KHz
• Limiter: Dual Active Multiband Peak, RMS, Thermal
• Processing (filters): FIR Linear Phase
• Crossover Frequency LF-HF: 950 Hz
• Slope LF-HF: 24 dB/Octave

Input

• Signal Input: 1xXLR fem, Bal.
• Signal Output: 1xXLR male, Bal.
• Network: RDNet remote control RJ45 connector IN/OUT
• Power Socket: 1xPowerCon TRUE1 IN / 1xPowerCon TRUE1 Out
  Controls: 1xSpeakers Coupling (7 presets) / 1x HF Compensation (8 presets) / 1XInput Attenuation Rotary Switch

Mechanics

• Housing: Multiplex Plywood / Polyurea Painted
• Housing Design: Trapezoidal 10°
• Handles: 2x side
• Rain Cover: Included
• Rigging Points” Integrated rigging hardware
• Width: 720 mm (28.35 in)
• Height: 320 mm (12.6 in)
• Depth: 520 mm (20.47 in)
• Weight” 28.6 Kg (63.00 lbs